สถิติ
เปิดเมื่อ16/12/2013
อัพเดท2/08/2020
ผู้เข้าชม7227032
แสดงหน้า11131186

ทะเบียนพาณิชย์อิเล็กทรอนิกส์
0413534001083
สินค้า
สมาชิก

สมัครสมาชิก | ลืมรหัสผ่าน
ปฎิทิน
October 2020
Sun Mon Tue Wed Thu Fri Sat
    
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

Marshall JMD1 Series JMD501

เข้าชม 2811 | ตอบ 1
 
Marshall JMD1 Series JMD501
 
  • ราคาปกติ : 38,000.00 ฿
  • ราคาพิเศษ : 30,400.00 ฿
  • ยี่ห้อ : Marshall
  • รุ่น : JMD1 Series JMD501
  • รายละเอียดสินค้า : Marshall JMD1 Series JMD501



     

    Unpacking

    The JMD501 is the 50-watt combo version of the JMD:1 product family. As soon as you take it out of the box, you'll immediately recognize the typical Marshall look: golden front, classic knobs, logo, typography... Nothing new on this amp! The dimensions are standard for a 50-watt combo (25' x 20.7' x 10') and it weights 50 lb. It features a 12' speaker, two EL34 power tubes and one ECC83 preamp tube.

    Front panel

    Marshall JMD501

    On the front panel, you'll find an input for connecting your guitar and a knob for selecting one of the 16 amp models available. You'll have to read the user's manual in order to know which hardware is being emulated: there are no 'I'm a JCM800' or 'I'm a JMP-1 with a Guv'nor' labels. You'll have to settle for ambiguous descriptions like 'Clean natural' and 'Lead Classic'! Perhaps Marshall didn't want to push it too far. Just read the user's manual to find out the topology of each model.

     

    Marshall JMD501

    The front panel also includes a standard gain control, a 3-band EQ (bass, middle, treble) and a channel volume knob. All five controls work in different ways depending on the selected preamp model.

     

    You have four channels to which you can assign any setting. And it also features a manual mode, which is very convenient to get an overview of the amps' sound possibilities. There is also a foot switch included that allows you to toggle between channels/presets.

     

    Like on Line 6 amps, a single control allows you to select and adjust one of the modulation effects. You can choose between gate, chorus, phaser, flanger, and a tremolo controlled by the Mod Depth setting; the speed rate is defined by the position of the Mod Adjust knob. Unfortunately, it is impossible to mix two effects. The amp also provides a delay effect with tap tempo and different modelings that affect repetitions (Hi-fi, Analogue, Tape and Multi). Apart from that, the JMD501 includes a digital reverb. All in all, thanks to its effects and control possibilities, the amp proves to be a very comprehensive tool. The presence knob is placed at the end of the signal path, just before the master volume control. Finally, also notice that the amp is equipped with power and standby switches.

    Rear panel

    Marshall JMD501

    The JMD501 is generous when it comes to connections! You have additional speaker outs at your disposal: one 16 ohm out, one 8 ohm out and two 16 ohm outs, plus an effect loop with send/return connectors, a +4dB/-10dB level selector and a mix control.

     

    Marshall JMD501

    The preamp output allows you to connect the JMD501 preamp to an external power amp. This connector also works when the amp is in standby mode (Silent Recording mode). The same applies to the phones output which allows you to play guitar with the sound of your amp without disturbing your whole neighborhood (in standby mode the speaker output is muted).

     

    A line input adds the possibility to connect a line-level source (MP3 or CD player) to play along with your favorite songs. The amp also features an Emulated Line Out on XLR that emulates the miking of a 4x12' speaker cabinet. Just like the headphones and preamp outputs, you can use it silently in standby mode.

     

    Marshall JMD501

    The Footcontroller input is dedicated to the supplied foot switch, but the amp can also be controlled via its MIDI in and out. By the way, using the foot controller is somewhat complex in the beginning. I had already tested the foot controller of the Marshall JVM210H, which is a bit unpractical (pressing a switch for the second time allows you to change mode — green, orange or red — without changing channel). The JMD501 foot controller includes six switches and allows you to store up to 28 presets directly in the Preset Store mode. You can also assign some switches of the front panel to the foot controller: manual, channel 1-4, modulation on/off, delay on/off, tap tempo, FX loop, and compare.

     

    Now, the time has come to experience the sound of this unique amp!

     

    Want to eat your cake and have it too?

    The philosophy behind this new series is that, based on the same tube amplification (two EL34 in the JMD501), a digital preamp stage (including an ECC83) allows you to get almost any possible guitar sound from the best Marshall all-tube amp heads. This digital technology patented by Softube is called 'Natural Harmonic Technology'. Here is the list of the preamp models available:

     

    * Clean 1 Modern: Marshall JVM410H preamp, Clean channel in Green mode.

    * Clean 2 Full: Marshall JCM2000 DSL100 preamp, Clean channel with Tone Shift on.

    * Clean 3 Classic: Marshall JMP-1 preamp, Clean 1 with Bass Shift on.

    * Clean 4 Natural: JMD:1 preamp with flat response (the amp's first own and new sound).

    * Crunch 5 Vintage: Mix of Marshall's 1959 and 1964 preamp.

    * Crunch 6 Classic: Marshall JCM800 2203 preamp.

    * Crunch 7 Deep: Marshall Haze 40 preamp (new tube amp made in Asia).

    * Crunch 8 Full: Marshall 1974 preamp.

    * Overdrive 9 Classic: Marshall JMP-1 preamp with OD2 preset.

    * Overdrive 10 Modern: Marshall JVM410H preamp, Crunch channel in Red mode.

    * Overdrive 11 Deep: Marshall JCM 800 2203 preamp + Bluesbreaker II stompbox in boost mode with maximum drive.

    * Overdrive 12 Detuned: Marshall Mode Four preamp with Scoop Mode on and Tone Matrix on 3.

    * Lead 13 Deep: Normal channel of the Marshall Haze 40 preamp with Boost and Bright on + Bluesbreaker II stompbox in boost mode with maximum drive.

    * Lead 14 Solid: Marshall Guv'nor stompbox.

    * Lead 15 Classic: Marshall JCM2000 DSL100 preamp + Bluesbreaker II stompbox.

    * Lead 16 Modern: Marshall JVM410H preamp, OD1 channel in Orange mode.

     

    The sound samples were recorded at UFO Studio, Paris (France) using a Chandler Limited TG2 mic preamp, a SHURE SM57 dynamic microphone and a BeyerDynamic M160 ribbon microphone, all going into a Digidesign 192 I/O audio interface. All simulations were recorded with a Gibson Les Paul Custom 1978.

     

    Marshall JMD501

    After listening to the sound samples, you'll realize that there are good things... and also bad things! The amp controls (gain and EQ) respond very differently depending on the selected simulations – which increases the sound possibilities. The sound results are interesting, even if some simulations disappointed me a bit, especially the clean presets (modern and natural) where the high frequencies don't have the warmth and round character of tube amps. Extreme presets sound a bit too muddy and compressed, and feedbacks are easily generated! I must confess that I really like the crunch presets of this amp. They surprised me a lot, especially the vintage and classic settings – they sound great. The overdrive presets are also very usable, some of them sound good (overdrive modern, overdrive deep and overdrive classic) while others don't (overdrive detuned).

     

    The overall quality of the effects is good, especially the modulation effects and the delay, which offers a lot of features (tap tempo, tape effect for the repetitions, etc.). Like many other digital reverbs, this one also sounds a bit imprecise at high output volumes.

     

    Marshall JMD1 Series JMD501 50W 1x12 Digital Guitar Combo Amp Features:

    • Power rating: 50W
    • Preamp: Digital Natural Harmonic Technology
    • Poweramp tubes: 2 x EL34
    • Preamp topologies: 16
    • Modulation effects: Chorus, Phaser, Flanger, Tremolo
    • Delay effects: Hi-Fi Analogue, Tape, Multi
    • Tap tempo control
    • Reverb: Independent custom voiced
    • Midi Control: Midi in, Midi Thru
    • Stompware controller: supplied
    • Emulated line out: XLR
    • Headphone out: 1/4' jack
    • Line in: 1/4' jack
    • Preamp: 1/4' jack
    • Effects loop: Serial / Parallel -10dBV/+4dB with mix control
    • Speaker output: 1x16 Ω, 1x8 Ω, 2x 16 Ω
    • Developed in the UK, manufactured in China
 
ความคิดเห็น :
1
อ้างอิง

mtb88
가장 확실한 먹튀검증 커뮤니티 Hello, 먹튀검증 I would like to 먹튀신고 tell you that 먹튀 I read your post very well. 먹튀검증업체 I put a lot of effort 먹튀커뮤니티 into finding this quality article. 먹튀사이트검증 Your writing skills are amazing. 먹튀사이트 Are you an expert 메이저놀이터 on this subject? 메이저안전놀이터추천 I think so. 메이저놀이터추천 That's how much 메이저놀이터your writing feels professional. 사설토토 I hope many high-quality posts 메이저사설토토 like yours will be posted 사설토토사이트추천 on the website I run by me. 사설토토사이트 If you're curious, 사설놀이터 please visit my website 안전놀이터 as well. 토토안전놀이터 I'm still lacking a lot, 안전놀이터 but if you come 토토사이트 and point out 토토추천 what I'm lacking, 메이저토토사이트 my website will be able to 먹튀없는토토사이트 develop further. 토토사이트추천 I'd be very happy if you would. 토토사이트 Once again, thank you for writing, and I hope you have a great day today. Thank you.
 
ลิงค์ที่เกี่ยวข้อง : https://elephonemobile.com/
mtb88 [15.165.35.xxx] เมื่อ 29/09/2020 13:28
ความคิดเห็นของผู้เข้าชม
ชื่อผู้แสดงความคิดเห็น :
สถานะ : รหัสผ่าน :
ลิงค์ที่เกี่ยวข้อง :
รหัสความปลอดภัย :