สถิติ
เปิดเมื่อ16/12/2013
อัพเดท2/08/2020
ผู้เข้าชม7237150
แสดงหน้า11144475

ทะเบียนพาณิชย์อิเล็กทรอนิกส์
0413534001083
สินค้า
สมาชิก

สมัครสมาชิก | ลืมรหัสผ่าน
ปฎิทิน
October 2020
Sun Mon Tue Wed Thu Fri Sat
    
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

YAMAHA T5n

เข้าชม 756 | ตอบ 0
 
YAMAHA T5n
 
  • ราคาปกติ : 185,000.00 ฿
  • ราคาพิเศษ : 155,500.00 ฿
  • ยี่ห้อ : YAMAHA
  • รุ่น : T5n
  • รายละเอียดย่อ :
    2500 W x 2 (2 Ohms) 2300 W x 2 (4 Ohms) 1350 W (8 Ohms) Bridge 5000 W (4 Ohms Network Amp Manager 2U ** รับประกันสินค้า 5 ปี จาก Yamaha Thailand
    รายละเอียดทั้งหมด :

    YAMAHA T5n 2500 W x 2 (2 Ohms) 2300 W x 2 (4 Ohms) 1350 W (8 Ohms) Bridge 5000 W (4 Ohms Network Amp Manager 2U

     

     

    ** รับประกันสินค้า 5 ปี จาก Yamaha Thailand

    A new standard in touring amplifiers, offering 2-ohm drive capability.

    In the 30 years that have passed since the P2200 power amplifier was introduced in 1976, Yamaha has been dedicated to the development of power amps that deliver superior sound, power, and reliability. And now, in 2006, Yamaha is proud to announce a new flagship series that marks this 30th anniversary with unprecedented performance: the Tn Series. The Tn series amplifiers are ruggedly designed to deliver optimum performance even under tortuous tour conditions, while offering sonic quality befitting a top-line model with up to 2500 watts power output (T5n, stereo @ 2 ohms). The ability to stably drive load impedances as low as 2 ohms makes the Tn series amplifiers ideal for powering line-array systems on the road. A high-volume fan cooling system and comprehensive protection circuitry help to maintain high reliability, and power consumption has been reduced by 50% compared to conventional amplifiers thanks to Yamaha's high-efficiency EEEngine amplifier technology. Of course the Tn Series includes on-board networking capability for remote control and monitoring, aptly denoted by the 'n' of Tn. Representing the culmination of 30 years of development and experience, Yamaha new Touring Amplifier with Network Capability — the Tn series amplifiers — are set to become the standard for a new generation of large-scale live sound systems.

     

    Solid Power for Any Application

    In touring applications that require the ability to drive large numbers of speakers, amp drive capability and power become extremely important criteria. Furthermore, since the entire system has to be set up, taken down, and transported for every show, the total number of amps required, and their total weight, has a significant influence on manpower and cost. While the Tn series power amps are all compact 2U-size units, they deliver remarkably high power: 2500 watts from the T5n, 2200 watts from the T4n, and 1900 watts from the T3n, stereo into 2 ohms. Tn series amplifiers are capable of driving line array or other large-scale speaker setups in systems that take up less space than ever before.

      T5n T4n T3n
    2 ohms per channel 2500 2200 1900
    4 ohms per channel 2350 2050 1400
    8 ohms per channel 1350 1150 750
    4 ohms bridge 5000 4400 3800
    8 ohms bridge 4700 4100 2800

    * 1kHz, THD+N=1%

    High Definition, Serious Impact

    By applying the full gamut of technology, experience, and resources acquired through the development and production of industry-standard digital mixing consoles and signal processors, as well as extensive know-how gained through years of hall and installation system design, The Tn series amplifiers have been refined to unprecedented levels of performance and sound quality. Transparency across the entire audio spectrum is a basic requirement, but the Tn amplifiers go beyond the basics with extraordinary midrange presence and a low end that is huge and authoritative while maintaining maximum reproduction accuracy. This has been achieved not only through no-compromise parts selection and circuit design, but also through extensive vibration-reduction measures that effectively suppress internal vibration that can have a negative impact on sound quality. The heat sinks, for example, are solidly screwed to the chassis side panels at numerous points, but with special insulators that are designed to absorb vibration and chassis resonance that would otherwise interfere with optimum reproduction. The detailed work involved goes well beyond the normal definition of manufacturing and crosses over into the realm of craftsmanship.

     

    Stable 2-ohm Drive Capability

    Line array systems offer many benefits for large scale live sound applications, but because of the many speakers involved they normally need to be driven by a correspondingly large number of power amplifiers. The 2-ohm drive capability of the Tn series amplifiers easily drives multiple speakers in line array systems.Tn series are also an excellent choice for driving multiple parallel-connected Yamaha Installation Series speakers as well as multiple parallel-connected monitor speakers located on the stage. In order to provide stable low-impedance drive capability the T-n amplifiers employ newly developed thin-film power transistors, and flat-wire power transformer windings to minimize heat loss. Many other details contribute, but the final result is totally stable drive capability down to 2 ohms.

    TOP

    Durability to Handle the Most Demanding Tours

     

    Daily setup, take down, and transportation is an unavoidable part of the touring routine, and the Tn series amplifiers are built to take it all in stride. A durable exterior resists dents and breakage, while dual high-volume cooling fans maintain stable operation under a wide range of ambient conditions. Large, tough fan guards prevent damage during transportation. Fan speed is automatically varied according to the current output power to maximize motor life. Dust filters at the fan intakes can be easily removed for cleaning. A comprehensive range of protection circuits is also provided: DC, muting, thermal protection, and an advanced output short sensing circuit (PC limiting) that contributes to reliable low-impedance drive capability. There's also a VHF protection circuit that will prevent damage to HF speaker units if input signals with frequencies higher than 20 kHz continue for more than a few seconds. All in all the Tn series amplifiers offer failsafe performance that will keep the show running night after night under even the severest conditions.

    Ultra-efficient Yamaha EEEngine Amp Drive

     

    Original Yamaha EEEngine technology reduces power consumption by approximately 50% compared to conventional amplifiers. Power supply quality and capacity are perennial obstacles in large-scale live sound systems, but the Tn series amplifiers' high power output with dramatically reduced power consumption goes a long way towards alleviating the problem. Reduced power consumption simultaneously achieves reduced heat generation, significantly increasing part life and reliability. Reduced heat generation further means that smaller, less-obtrusive cooling fans can be used, providing greater freedom for internal layout. That, in turn, translates into overall design that emphasizes sound quality rather than simply keeping the amp stable. In order to achieve stable 2-ohm drive capability the EEEngine circuitry in the Tn series amplifiers features a newly developed high-efficiency FET current buffer drive circuit. Only Yamaha can deliver this level of high efficiency and stability with low-impedance loads.

    Advanced Networking Capability

    The rear panels of the Tn series power amplifiers feature RJ45 connectors that allow connection to a Yamaha ACU-16C Amp Control Unit for remote status monitoring and control of parameters such as on/off switching, muting, and attenuation from a computer. Furthermore, warnings can be displayed when preset parameter limits are exceeded, and automatic logging contributes to easy, efficient troubleshooting. With an NHB32-C Network Hub/Bridge it also becomes possible to remotely control multiple units via a CobraNet™ network. In addition to the ACU-16C's amp control features, it can also function as a high-precision 16-channel DA converter, receiving 24-bit digital audio data over a CobraNet™ network.

     

    AMP CONTROL UNIT
    ACU-16C

     

     

    NETWORK HUB/BRIDGE
    NHB-32C

     

    Superior Handling through Extensive Experience In the Field

    The Tn series power amplifiers represent the culmination of over 30 years of know-how acquired through amp development and manufacture as well as feedback from professionals in the field. Details can make a huge difference in real-world handling…such as sturdy front-panel handles that, although indispensable for transporting and rack mounting, are removable for installation use. Also, Euroblock connectors are provided in addition to XLR connectors for full compatibility with installation wiring. The Euroblocks can also be used as link out connectors for flexible integration with the widest possible range of system needs.

     

    General specifications

    120V Models
      T5n T4n T3n
    Dynamic power;
    1kHz;
    20ms burst
    2ohms; Stereo 3400W/ch 2900W/ch 2200W/ch
    4ohms; Bridge 6800W 5800W 4400W
    Output power; 1kHz; 2ohms; Stereo 2500W/ch 2200W/ch 1900W/ch
    4ohms; Stereo 2200W/ch 1950W/ch 1400W/ch
    8ohms; Stereo 1350W/ch 1150W/ch 790W/ch
    4ohms; Bridge 5000W 4400W 3800W
    8ohms; Bridge 4400W 3900W 2800W
    100V Line 1250W/ch RL=8ohms - -
    70V Line - - 625W/ch RL=8ohms
    230V Models
      T5n T4n T3n
    Dynamic power;
    1kHz;
    20ms burst
    2ohms; Stereo 3400W/ch 3100W/ch 2150W/ch
    4ohms; Bridge 6800W 6200W 4300W
    Output power; 1kHz; 2ohms; Stereo 2500W/ch 2200W/ch 1900W/ch
    4ohms; Stereo 2350W/ch 2050W/ch 1400W/ch
    8ohms; Stereo 1350W/ch 1150W/ch 750W/ch
    4ohms; Bridge 5000W 4400W 3800W
    8ohms; Bridge 4600W 4100W 2800W
    100V Line 1250W/ch RL=8ohms - -
    70V Line - - 625W/ch RL=8ohms

    TOP

    General specifications
    Total harmonic distortion Less than 0.1% (20Hz-20kHz; Halfpower)
    Intermoduration distortion Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
    Frequency response 0, 0, -0.5dB; 20Hz-20kHz
    S/N ratio More than 107dB (DIN AUDIO) More than 106dB (DIN AUDIO) More than 105dB (DIN AUDIO)
    Crosstalk Less than -67dB
    Damping factor More than 800
    Voltage gain 26dB/32dB
    Maximum input voltage +24dBu
    Connectors Line input / output ports XLR-3-31 type/ch
    Euroblock connector(balanced)/ch
    Speaker output ports speakON/ch, 5-way binding post /ch
    Control ports RJ45 x2
    Protection circuit Load protection POWER switch on/off mute, DC-fault (Amplifier shuts down automatically), Clip limiting (THD≥0.5%)
    Amplifier protection Thermal (Mute the output; Heatsink temp≥90ºC; return automatically), VI limiter(Limit the output; RL≤1ohms)
    Power supply protection Thermal : Amplifier shuts down automatically (heatsink temp≥100ºC).
    Amplifier class EEEngine
    Cooling Continuously variable-speed fan x2
    Power requirements 100V, 120V(30A Twist lock connector), 230V or 240V; 50/60Hz
    Power consumption 1/8 (2ohms / Pink noise) 1600W 1400W 1200W
    Idle 70W 70W 70W
    Stand-by 5W 5W 5W
    Dimensions Width 480mm; 18-7/8'
    Height 88mm; 3-7/16'
    Depth 447mm; 17-9/16'
    Weight 14.0kg; 30.9lbs

    Half Power=3dB below rated power 
    Specifications may change without notice.

 
ความคิดเห็นของผู้เข้าชม
ชื่อผู้แสดงความคิดเห็น :
สถานะ : รหัสผ่าน :
ลิงค์ที่เกี่ยวข้อง :
รหัสความปลอดภัย :