สถิติ
เปิดเมื่อ16/12/2013
อัพเดท2/08/2020
ผู้เข้าชม7249466
แสดงหน้า11160706

ทะเบียนพาณิชย์อิเล็กทรอนิกส์
0413534001083
สินค้า
สมาชิก

สมัครสมาชิก | ลืมรหัสผ่าน
ปฎิทิน
October 2020
Sun Mon Tue Wed Thu Fri Sat
    
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

dbx 2215V

เข้าชม 598 | ตอบ 0
 
dbx 2215V
 
  • ราคาปกติ : 30,000.00 ฿
  • ราคาพิเศษ : 19,900.00 ฿
  • ยี่ห้อ : dbx
  • รุ่น : 2215V
  • รายละเอียดย่อ :
    Dual-Channel 15-Band Equalizer/Limiter
    รายละเอียดทั้งหมด :

     

    dbx 2215V Dual-Channel 15-Band Equalizer/Limiter

     

     
    • Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
    • Patent-pending PeakPlus™ Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
    • An extremely high quality EQ, patent-pending Type III® Noise Reduciton, and the elegant new PeakPlus™ Limiter all in one great sounding box
    • Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available
    • Status LEDs offer visual feedback for all settings on the front panel

    I t's amazing. One little button. So much effect. dbx® Type III® Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQs possible, boxes with the heritage and performance to rival our famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.

    But hey, Roger wasn't about to stop there. PeakPlus™ Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said 'I bet they'll work a lot better if there's a cool limiter built in.' Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

    20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx® Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!

     

     

    INPUT

    Connectors:1/4' TRS, female XLR (pin 2 hot), and barrier terminal strip

    Type:Electronically balanced/unbalanced, RF filtered

    Impedance:Balanced 40k ohm, unbalanced 20k ohm

    Max Input Level:>+21dBu balanced or unbalanced

    CMRR:>40dB, typically >55dB at 1kHz

    OUTPUTS

    Connectors:1/4' TRS, male XLR (pin 2 hot), and barrier terminal strip

    Type:Impedance-balanaced/unbalanced, RF filtered

    Impedance:Balanced 200 ohm, unbalanced 100 ohm

    Max Output Level:>+21dBu balanced/unbalanced into 2k or greater
    >+18dBm balanced/unbalanced (into 600)

    SYSTEM PERFORMANCE

    Bandwidth:20Hz to 20kHz, +/-0.5dB

    Frequency Response:<10Hz to >50kHz, +0.5/-3dB

    Noise Reduction In:(+/-6 and +/-15dB range):

    Signal-to-Noise:>102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

    Dynamic Range:>120dB, unweighted

    Noise Reduction Out:(+/-6dB range):

    Signal-to-Noise:>94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth

    Dynamic Range:>112dB, unweighted

    Noise Reduction Out:(+/-15dB range):

    Signal-to-Noise:>90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

    Dynamic Range:>108dB, unweighted

    THD + Noise:<0.04%, 0.02% typical at +4dBu, 1kHz

    Interchannel Crosstalk:<-80dB, 20Hz to 20kHz

    Noise Reduction:Up to 20dB of dynamic broadband noise reduction

    FUNCTION SWITCHES

    Type III NR:Activates dbx® Type III® Noise Reduction

    EQ Bypass:Bypasses the Graphic Equalizer section in the signal path

    Low Cut (recessed):Activates the 40Hz 18dB/octave Bessel high-pass filter

    Range (recessed):Selects either +/- 6dB or +/-15dB slider boost/cut range

    INDICATORS

    Output Level Meter:4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu

    Gain Reduction Meter:4-LED bar graph (all Red) at 0, 3, 6, and 10dB

    Type III® NR Active:Yellow LED

    EQ Bypass:Red LED

    Clip:Red LED

    Low Cut Active:Red LED

    +/-6dB range:Yellow LED

    +/-15dB range:Red LED

    POWER SUPPLY

    Operating Voltage:100VAC 50/60Hz, 120VAC 60Hz
    230VAC 50/60Hz

    Power consumption:18W

    Main Connection:IEC receptacle

    PHYSICAL

    Dimensions:3.5' H X 19' W X 7.9' D (8.9cm x 48.3cm x 20.1cm)

    Weight:8.5 lbs. (3.9 kg)

    Shipping Weight:9.5 lbs. (4.3 kg)

    Note: Specifications subject to change without notice.

     

     

 
ความคิดเห็นของผู้เข้าชม
ชื่อผู้แสดงความคิดเห็น :
สถานะ : รหัสผ่าน :
ลิงค์ที่เกี่ยวข้อง :
รหัสความปลอดภัย :